Modellen Quickie

ShotGun MKII:
shotgunMKIIShotgun
Shotgun MK-II All Composite Quickie 500

There has been talk of a low cost all composite Quickie 500. Here it is.
It is an AMA legal airframe that will come in four different colors. White, Yellow, Red and Orange. Extra multi colors painted in the mold are available for ease of customizing.

The ShotGun MK-II is the next generation of the ShotGun. The fuselage now has 6 ounce carbon fiber running from the landing gear and is sandwiched between the wooden firewall and the glass front end. The front end is stiff, very stiff for good power transfer. No more filling around the wooden firewall and the fuse sides. It is done for you. The nose has been shortened just a little to help get the C/G to the suggested point. and change the turning characteristics. It now comes stock with carbon landing gear that is reversible. Taper back for asphalt and taper forward for the grass fields.

The ShotGun MK-II has all the same great flying qualities, but you will find it faster now with these changes
All airplanes come with two piece wings for ease of shipping and transport. The longest dimension of your shipping box is the length of the fuselage. It makes a big difference in the cost or convenience of transporting your airplanes to events. If you choose to have a one piece wing, no problem. Just brush a coat of slow cure epoxy on the tube and slide it together. Make sure that it is straight and then you can tape or glass a strip down the center to make you feel better. The two piece wings are strong. They have been extensively tested and no failures. Bruce has even used them on the 60" long and thin FAI wings... Not a problem.

This Quickie is getting to be the measure of everything at the races. Get you order in NOW!

Prices: 

Shotgun MK-II Quickie 500 only $549.00

Extra trim color (3 colors) $25.00
Trim color on stab. $15.00
Numbers in any of the trim colors $15.00
Checker board in random designs $25.00  

If you have a combination that is different than this, tell us what you want and if we can do it, we will figure a price and do it for you. 

Shipping for one airplane to one location $65.00
Shipping on two airplanes to one location $90.00

Item Size Description  Price
GUN-W Q-500 - White All Composite Q-500 549.00 each
GUN-R Q-500 - Red All Composite Q-500 549.00 each
GUN-Y Q-500 - Yellow All Composite Q-500 549.00 each
GUN-O Q-500 - Orange All Composite Q-500 549.00 each
    Shipping   65.00 or 90.00 for two

Other items for your Shotgun

1/8"Carbon fiber PushRods
Dubro 4-40 threaded rods
Jett conforming mount (fits TT40 Pro)
Predator style engine mount (fits TT40 Pro)

Q500 spinner
Tettra Bladder Fuel Tank or Jett Bladder Tank
Racing wheels
Super Tanker
PowerSaver After-run oil
Racing Tape

Order the Shotgun

Darrol Cady
PO Box 14273
Portland, OR 97293 USA
Ph: 360-903-3520
 

 
Bird of Prey:
BirdofPrey

The Bird of Prey features a composite fuselage, wing, and tail.
It also includes the aluminum landing gear.
Completion requires gluing on the tail, installing the radio linkage, installing the engine mount, and painting.
Alignment of the tail is made easy by the molded tail and stab saddle, and the technique used to align it.

The plane is also available painted and ready for radio and engine installation. Contact the manufacturer for information.

Price: $375

Shipping: Call

Lyle Larson
California Speed Pros
HC 80, Box 475
Piedmont, SD 57769
605-787-6340

 

Dawg Gone It:
dgi1dgi6
dgi4Dawg-kit


Dawg Gone It is an all composite Quickie 500 Pylon Racer.
Features include one piece hollow core wing with skinned hinges, torque rods installed made in a CNC mold.
Molded hollow core V-Tail may be glued in or bolted on for mobility.
Fuselage is Epoxy Glass and Kevlar set up for the new square mounts, landing gear included.
Air plane Ready For Paint. 
Wing span 52 inches: Wing Area 505 sq inches. 

Price: $400

Manufacturer:
Kevin Matney
Matney Models
10765 Victory Road
Erie, MI 48133
734-848-8195

 
Vortex:
vortex_flynn_and_bridge_small

Randy Bridge just won the 2001 AMA Q-500 (428) event with the Vortex for the second year in a row.

Completely built with composite wing, wood fuselage and composite "V" tail.
Cost begins at $450.00 two colors on wing and stab and unfinished fuselage.
Additional colors are $25.00 each. Numbers such as AMA or NMPRA are cost of stencils.
A finished fuselage adds $100.00, which includes glass, paint, rear push rods installed, tail skid, servo tray, wheels and polished landing gear.

Price: $450-$650 depending of level of completion

Shipping: $35

Chuck Bridge
(209) 358-8961 - Phone number
(209) 358-2937 - Fax, not always on


 
V-gun:
V-Gun
 
Meer artikelen...
tumblr page counter